(2,54mm) .100" hhsc series (2,54mm) .100" pitch header or socket termination hhsc?105?10.00?se?te hhsc?108?06.00?su?tu jtag (ieee 1149.1) compatible 38 awg micro ribbon coax cable www.samtec.com -tu, -td & -te mates with: ssw, ssq, ssm, esw, esq, bcs -su, -sd & -se mates with: tsw, mtsw, tsm, tss, zss specifications for complete speci cations see www .samtec.com? hhsc cable: 38 awg coax micro ribbon signal routing: 50 single-ended overall length: (152mm) 6" to (1m) 40" standard cable flexing life: >40,000 cycles cable bending radius: <2,5mm plating: au over 50 (1,27?) ni current rating: 300 millamp max propagation delay: 4.5 nsec/meter operating temp range: -40? to +105? rohs compliant: ye s no. of pins per row end no. 1 wire length end no. 2 ??xx.xx? = wire length in inches (95,3mm) 03.75" minimum 05, 07, 08, 10, 15, 20, 25 (call for other sizes) hhsc 1 ?tu = terminal up ?td = terminal down ?te = terminal edge mount ?su = socket up ?sd = socket down ?se =socket edge mount ?tu/?td to ?tu/?td ?tu/?td to ?su/?sd ?su/?sd to ?su/?sd ?tu/?td to ?te ?su/?sd to ?te ?tu/?td to ?se ?su/?sd to ?se ?te to ?te ?te to ?se ?se to ?se end to end l (22,00) .87 (21,74) .86 (21,49) .85 (26,87) 1.06 (26,62) 1.05 (26,49) 1.04 (26,24) 1.03 (31,75) 1.25 (31,37) 1.24 (30,99) 1.22 application specific ? other wire gauges ? other connector pitches ?other lengths ? other pin counts ?hot plugging contact dr@samtec.com ? tu/?td ?su/?sd ?se ?te end a ( 13,46) .530 ( 12,70) .500 ( 6,91) .272 ( 9,27) .365 b ( 26,76) 1.053 ( 30,80) 1.213 wire length (1,27) .050 oal = wire length + l (2,54) .100 02 01 b (16,97) .668 a 01 02 applications mated with ssq or htss processing conditions will affect mated height. (15,62) .615 important note: for optimal performance, at least one transmission line must be dedicated to ground. for more information, go to www.samtec.com/cable_ builder/xhsc_grounding.asp note: cable lengths longer than 40.00" (1 meter) are not supported with s.i. test data. note: verify part number with samtec s interactive cable builder at www.samtec.com/ cable_builder/pitch.asp note: this series is non-standard, non-returnable. end no. 1 (?u shown) end no. 2 (?u shown) high speed cable assemblies f-210 supplement cable length rated @ -3db insertion loss hhsc 10" (254mm) 400 mhz / 0.8 gbps performance and complete test data available at www.samtec.com?hhsc or contact sig@samtec.com
|